You are using an outdated browser. Unfortunately, this does not allow us to guarantee that our website can be used without any errors. The use of outdated browsers often leads to low speed and security problems, too. We recommend that you install a new version or an alternative browser to get the full functionality of our website.
The type 2672 is not available anymore since 01/11/20.
Please contact us regarding a successor product.
- 2/2 way Butterfly Valve, Pneumatically Operated
The depiction of the products may differ from the actual specific design.
Please consider the technical attributes and Data Sheets.
The control valve type 2672/8630 consists of a 2-way butterfly valve type 2672 and an electro-pneumatic position controller including superimposed process controller type 8630 (TopControl Continuous) with analogue feedback card. The butterfly valve housing is made of cast iron and the flap is made of stainless steel. The connection between the flap and the actuator follows a standard interface (flange connection). The rotary movement in the actuator is achieved by a linear piston with a steep-threaded spindle. The rotary actuator moves the butterfly valve by max. 90°. The compact electropneumatically actuated control valve can be used for a wide range of applications and media. NOTE: The use of these control valves is only useful in a process control loop; The valve is not suitable for direct position control.
High flow rate
For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.