Bürkert
Insertion flowmeter with paddle wheel, ELEMENT design
Type 8026 / Ident No. 560860
Product description
The flowmeter Type 8026 is a compact device, specially designed for measuring the flow rate in solid-free liquids, in a variety of applications (water, waste water monitoring, chemical processing, etc.). Type 8026 is available with: - 2 configurable outputs: one transistor output (NPN) and one 4...20 mA current output (2-wire) - 3 configurable outputs: two transistor outputs (NPN/PNP) and one 4...20 mA current output (2-wire) - 4 configurable outputs: two transistor outputs (NPN/PNP) and two 4...20 mA current outputs (3-wire). Type 8026 converts the measured signal, displays different values in different units (if display/configuration module mounted) and computes the output signals, which are provided via one or two M12 fixed connectors. Thanks to 1 or 2 transistor outputs, the flowmeter can be used to switch a solenoid valve, activate an alarm and, thanks to 1 or 2 current outputs, establish one or two control loops. Thanks to 1 or 2 transistor outputs, the flowmeter can be used to switch a solenoid valve, activate an alarm and, thanks to 1 or 2 current outputs, establish one or two control loops.
- Commodity Codes
- 90261021
- Country
- FR
Technical attributes
Name |
Value |
Unit |
|---|---|---|
| Type | 8026 | |
| Product sub-group | Flow rate | |
| Flow rate (volume) | Yes | |
| Concentration | No | |
| Continuous measurement | Yes | |
| Dosing | No | |
| Switch | No | |
| Construction device | Compact | |
| Display type | no display | |
| Protection class measurement device (IP) | IP65/67 | |
| Protection rate measurement device NEMA | NEMA 4X | |
| DC voltage min. | 14 | V |
| DC voltage max. | 36 | V |
| Battery voltage | No | |
| Operating supply type | 2 conductor | |
| Precision of volume flow rate in relation to reading | 1 | % |
| Temperature environment min | -10 | °C |
| Temperature environment max | 60 | °C |
| Temperature medium min | -15 | °C |
| Temperature medium max | 100 | °C |
| Nominal pressure (DIN EN 1333) | PN 10 | |
| Dynamic viscosity min. | 0 | cP |
| Dynamic viscosity max. | 300 | cP |
| Detection of flow direction | No | |
| Sensor type | Paddle wheel | |
| Paddle wheel type | Magnetic | |
| Paddle wheel measuring principle detection | Hall | |
| Fitting electronic interface | Insertion 2 (inch) | |
| Electrical connection 1 type | Plug - M12 | |
| Electrical connection 1 quantity | 1 | PCE |
| Electrical connection 1 number of contacts | 5 | PCE |
| Electrical connection 1 gender | male | |
| Electrical connection 1 material category | Light metals | |
| Electrical connection 1 material | Diecast zinc, nickel-plated | |
| Electrical connection 1 seal material | NBR (Nitrile rubber) | |
| Output type analog quantity | 1 | PCE |
| Output analogue current functioning principle source | Yes | |
| Output analogue current functioning principle drain | Yes | |
| Output type analog sinus | No | |
| Output type current modulated according to NAMUR | No | |
| Output 1 type analog current | 4-20 mA | |
| Output 1 digital type | Transistor | |
| Output 1 digital transistor connection NPN | Yes | |
| Output 1 digital transistor connection PNP | No | |
| Digital output 1 transistor contactless | 0,7 | A |
| Electronics body material category | Metals | |
| Electronics body material | Stainless steel | |
| Electronics body material composition | 1.4404 (316L) | |
| Cover material | PPS (Polyphenylene sulphide) | |
| Protection lid material | PC (Polycarbonate) | |
| Nut material | PC (Polycarbonate) | |
| Seal sensor/housing material | EPDM (Ethylene-propylene-diene rubber) food-quality | |
| Seal housing/cover material | EPDM (Ethylene-propylene-diene rubber) | |
| Protection lid seal material | EPDM (Ethylene-propylene-diene rubber) food-quality | |
| Electrical connection plate material | Stainless steel | |
| Screw material | Stainless steel | |
| Fastening part material | PSU (Polysulfone) / PPSU (Polyphenylsulfone) | |
| Parametrisation local | Yes | |
| Parametrisation separate | No | |
| Parametrisation fixed | No | |
| Finger material composition | Plastics | |
| Finger material | PVDF (Polyvinylidene fluoride) | |
| Medium-contacting parts seal material | FKM (Fluor rubber) | |
| Paddle wheel material | PVDF (Polyvinylidene fluoride) | |
| Paddle wheel axle material | Ceramic | |
| Bearing material category | Technical ceramics | |
| Bearing material | Ceramic | |
| Insertion sensor length | short | |
| Tropical climate version | Yes | |
| Time dosing | No | |
| Batch dosing | No | |
| Extended diagnosis | No | |
| Volumeter | Yes | |
| Weight | 0,700000 | kg |
Downloads
Data Sheets
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
Type 8026 data sheet | Insertion paddle wheel flowmeter with ELEMENT design | 1 MB | EN / EU |
|
|
Type S020 data sheet | Insertion fitting for flow or analytical measurement | 2 MB | EN / EU |
|
|
Tipo 8026 hoja de datos | caudalímetro de rueda de aletas Insertion, diseño ELEMENT | 2 MB | ES / ES |
|
|
Typ 8026 Datenblatt | Insertion-Flügelrad-Durchflussmessgerät im ELEMENT-Design | 2 MB | DE / DE |
|
|
Typ S020 Datenblatt | Insertion-Fitting für Durchfluss-/Analysemessungen | 2 MB | DE / DE |
|
|
Type 8026 fiche technique | Débitmètre Insertion à ailette,conception ELEMENT | 2 MB | FR / FR |
|
|
Type S020 fiche technique |Raccord Insertion pour les mesures de débit ou d'analyse | 2 MB | FR / FR |
User Manuals
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
Accessory Type 8026 8036 SE36 8202 8222 8228 ELEMENT | Display module | 808 kB | EN,FR,DE / EU |
|
|
Operating Instr. Type 8026 8036 SE36 ELEMENT | Insertion/Inline flowmeter/Flow transmitter | 5 MB | EN / EU |
|
|
Operating Instructions Type S020 | Insertion fitting | 2 MB | EN / EU |
|
|
Quickstart Type 8026 8036 SE36 ELEMENT | Insertion or Inline flowmeter / Flow transmitter | 2 MB | EN / EU |
|
|
Bedienung Typ 8026 8036 SE36 ELEMENT | Insertion-/Inline-Durchfluss-Messer / -Transmitter | 6 MB | DE / EU |
|
|
Bedienungsanleitung Typ S020 | Insertion Fitting | 2 MB | DE / EU |
|
|
Man. d'utilisat. Type 8026 8036 SE36 ELEMENT | Débitmètre Insertion Inline/Transm.de débit | 5 MB | FR / EU |
|
|
Manuel utilisateur type S020 | Raccord à insertion | 2 MB | FR / EU |
|
|
Quickstart Typ 8026 8036 SE36ELEMENT | Insertion-/Inline-Durchfluss-Messer/-Transmitter | 2 MB | DE / EU |
|
|
Quickstart Type 8026 8036 SE36 ELEMENT | Débitmètre insertion Inline/Transmetteur de débit | 2 MB | FR / EU |
EU Declaration of Conformity
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 472 kB | ML |
Flyers and Catalogues
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
On/Off and Control Valves | 1 MB | EN / EU |